Description
CHARACTERISTICS
Good compatibility with most polymer lattices used in tape and labeling PSA adhesives, including acrylic, PVA, EVA and
SBR lattices.
APEO and solvent free.
Might precipitate if mixed with cationic lattices or other cationic substances.
When mixing with other substances, it might need slow addition in order to prevent precipitation or grit formation.
It is advisable to stir before using, in order to promote an even distribution of the dispersion.
REGULATORY STATUS
Aquadhes® 6001 is in compliance with U.S Food and Drug Administration for use in food packaging and food processing,
Title 21 of Code Federal Regulations, section 175.105 Adhesives.
All components in Aquadhes® 6001 are listed in EINECS (European Inventory of Existing Commercial Chemical
Substances).
APPLICATIONS
Recommended as tackifier to be used with acrylic, PVA, EVA and SBR lattices in pressure sensitive adhesives for
labeling.
It promotes strong adhesion to high and low energy surfaces and a fair level of cohesion.
FORM OF SUPPLY
IBC´s (1000 kg), Road Tanks.
STORAGE RECOMMENDATIONS
Aquadhes® 6001 resin dispersion is solvent-free and must be protected from freezing.
We also advise to avoid an extended storage at a temperature over 35°C.
To prevent evaporation and subsequent skin formation or formation of coarse particle, keep containers
or drums closed.
SHELF LIFE
Up to three months under normal storage conditions. Following positive evaluation of product condition, it can be used after three months.
